Load capacitycustomer specific kg
customer specific lbs
(Load capacity is based on < 10.000 cycles)
Travelsingle extension 75 %
- Tabs / bajonets
Load capacity varies as the result of a number of factors. Main factors being the type of slide, length, and ratio between pull-out length and closed length. Another important factor is the number of cycles the slide is required to make. Thomas Regout distinguishes the type of usage between dynamic use and static use. Other factors that influence the load capacity are the features the slide is equiped with, and how it is mounted.
Life cycle: 30.000 cycli with a load capacity 2 kg (T = 20 ºC)
Sliding force: 15 N, notching forse 20N, unnotching force 40N
Maximum temperature approx. 85°C, determined by applied plastics and lubrication.
Minimum temperature approx. -40°C, determined by applied plastics and lubrication.
Attention: maximum and minimum temperature are strongly determined by the specific application; duration of exposure, impact and other forces on slide and slide components etc. Values mentioned are indicative, it is important to judge each individual application.
Surface treatment (finishing)
Our slides are available in a selection of standard finishes. These finishings can be found in the feature list. The overview provides information about which slide can have a specific surface treatment. If you require an alternative or specialized finish not listed, please contact us for further information.