General information

ALLMAN TRA - 3613SD

General information Full extension telescopic ball bearing drawer slide with hold-in bumper and trigger release disconnect. This slide is with a load capacity of 25 kg part of our light duty range.
  • Load capacity

    Load capacity

    25 kg
    55.12 lbs
    (Load capacity is based on < 10.000 cycles)
  • Width

    Width

    12.7 mm
    0.5 inch
  • Height

    Height

    36.6 mm
    1,44 inch
  • Travel

    Travel

    full extension 100%
Product features
Technical information
ALLMAN TRA - 3613SD
Technical information

ALLMAN TRA - 3613SD 

  • Full extension telescopic ball bearing drawer slide with closing bumper
  • Trigger release disconnect feature; 
  • Supports loads of 25 kg
  • Part of our light duty slide range 
  • Perfect for small retail displays, storage systems and other furniture related applications 
length mm/inch
travel mm/inch
cycles 10.000 kg/lbs
cycles 50.000 kg/lbs
cycles 100.000 kg/lbs
art. nr.
fixation
250 mm / 9.8”
250 mm / 9.8”
20 kg / 44.1 lbs
18 kg / 39.7 lbs
15 kg / 33.1 lbs
13636S00
Cabinet side:
300 mm/ 11.8”
300 mm/ 11.8”
20 kg / 44.1 lbs
18 kg / 39.7 lbs
15 kg / 33.1 lbs
13636S01
Metal: M3 / M4 / ISO 7380
350 mm / 13.8”
350 mm / 13.8”
20 kg / 44.1 lbs
20 kg / 44.1 lbs
18 kg / 39.7 lbs
13636S02
Wood: 2,9 / DIN 7981 / ISO 7049
400 mm / 15.7"
400 mm / 15.7"
25 kg / 55.2 lbs
22 kg / 48.5 lbs
20 kg / 44.1 lbs
13636S03
450 mm / 17.7”
450 mm / 17.7”
25 kg / 55.2 lbs
22 kg / 48.5 lbs
20 kg / 44.1 lbs
13636S04
Cabinet side:
500 mm / 19.7"
500 mm / 19.7"
22 kg / 48.5 lbs
20 kg / 44.1 lbs
18 kg / 39.7 lbs
13636S05
Metal: M3 / DIN 7984
550 mm / 21.6”
550 mm / 21.6”
22 kg / 48.5 lbs
20 kg / 44.1 lbs
18 kg / 39.7 lbs
13636S06
M3 / DIN 7985 / ISO 7045
600 mm / 23.6"
600 mm / 23.6"
20 kg / 44.1 lbs
18 kg / 39.7 lbs
15 kg / 33.1 lbs
13636S07
M4 / ISO 7380
650 mm / 25.6”
650 mm / 25.6”
20 kg / 44.1 lbs
18 kg / 39.7 lbs
15 kg / 33.1 lbs
13636S08
Wood: 2,9 / DIN 7981 / ISO 7049
700 mm / 27.6”
700 mm / 27.6”
20 kg / 44.1 lbs
18 kg / 39.7 lbs
15 kg / 33.1 lbs
13636S09

Load capacity
Load capacity varies as the result of a number of factors. Main factors being the type of slide, length, and ratio between pull-out length and closed length. Another important factor is the number of cycles the slide is required to make. Thomas Regout distinguishes the type of usage between dynamic use and static use. Other factors that influence the load capacity are the features the slide is equipped with, and how it is mounted. Slides are usually mounted sideways so all data concerning load-capacity will be given for side mounted use. For information about the load capacity with bottom-mounted slides, please contact our sales department.

Dynamic load capacity
In order to determine the dynamic load capacity, all types of Thomas Regout slides have been tested for 100,000 cycles. Their maximum load capacity is compliant with, or exceeds, all common national and international standards including DIN, BIFMA, BS, EN and JIS. The dynamic load capacity figures can be found in the graph below.

Static load capacity
Static load capacity is based on test results at 500, 1000 and 10,000 cycles. This is most common for industrial purposes. The static load capacity is considerably higher than the dynamic load capacity for all slides. The static load capacity figures listed below were determined for a single length of that slide and are for indication purposes only. Specific applications can be assessed by our R&D department and tested if necessary. 

Extension
Extension is defined as the ratio of the travel length of the slide (T) and the lenght of the slide in closed position (L): T = (T/L)*100%. The influence of the extension and length of the slide on the load capacity is shown in the graph below.

Thermal resistance
Maximum temperature approx. 100°C, determined by applied plastics and lubrication.
Minimum temperature approx. -20°C, determined by applied plastics and lubrication.

Attention: maximum and minimum temperature are strongly determined by the specific application; duration of exposure, impact and other forces on slide and slide components etc. Values mentioned are indicative, it is important to judge each individual application.

Materials
Thomas Regout slides are available in numerous materials and coatings. Below is an overview of all the materials used in our slides. All our products are compliant with EU ROHS standards.

Sections:

  • Cold rolled, low carbon and high yield strength steel according to EN 10268 and EN 10139
  • Pre-galvanised low carbon and high yield strength steel according to EN 10147 and EN 10139
  • Stainless steel according to EN 10088-2 and EN 10259

Ball cages: Electrolytically galvanised, cold rolled, low carbon and high yield strength steel according to EN 10131 and EN 10152
Ball bearings: Hardened carbon steel C15, Kl 4 DIN 5401
Locking features: PA, PE, PBTP, TPU, EPDM
Sequence devices: PA, TPU, PP Bumpers: RR PA, TPU, EPDM
Lubrication: Heavy duty ball bearing grease (free of lead), based on mineral oil

Stainless steel
More and more telescopic slides are used in new applications which requires very high corrosion resistance. Due to this fact, Thomas Regout has created the possibility to supply its total product range in stainless steel according to EN 10088-2 and EN 10259. Please inform us about your requirements to create the slide you need. Surface treatment:Our slides are available in a selection of standard finishes to the specifications listed below. If you require an alternative or specialized finish not listed, please contact us for further information

Surface treatment (finishing)
Our slides are available in a selection of standard finishes. These finishings can be found in the feature list. The overview provides information about which slide can have a specific surface treatment. If you require an alternative or specialized finish not listed, please contact us for further information.

Product images
ALLMAN TRA - 3613SD
Product images
ALLMAN TRA - 3613SD | Full extension | Telescopic slide | Thomas Regout International B.V
ALLMAN TRA - 3613SD | Full extension | Telescopic slide | Thomas Regout International B.V
CAD Centre
ALLMAN TRA - 3613SD
CAD Centre

ALLMAN TRA - 3613SD - Full extension telescopic slide below you can download the stepfile, .PDF and other technical specifications which belong to the ALLMAN TRA - 3613SD.

Take a look at our Youtube channel to see the functionality of the lock out- disconnect feature of our telescopic ball bearing drawer runners. 

EU

General downloads

DWG downloads

PDF downloads

STEP downloads

3601
3601 (692 kb)
136-36S00-00
136-36S00-00 (838 kb)
136-36S01-00
136-36S01-00 (883 kb)
136-36S02-00
136-36S02-00 (879 kb)
136-36S03-00
136-36S03-00 (916 kb)
136-36S04-00
136-36S04-00 (928 kb)
136-36S05-00
136-36S05-00 (928 kb)
136-36S06-00
136-36S06-00 (928 kb)
136-36S07-00
136-36S07-00 (929 kb)
136-36S08-00
136-36S08-00 (928 kb)
136-36S09-00
136-36S09-00 (929 kb)

US

Share this page
News