General information

TITAN E TR-7120

General information Full extension telescopic ball bearing drawer runner with drawer carrier and pull in fail safe feature. Supports loads up to 230 kg and is part of our heavy duty slide range.
  • Load capacity

    Load capacity

    230 kg
    507 lbs
    (Load capacity is based on < 10.000 cycles)
  • Width

    Width

    20.1 mm
    0.79 inch
  • Height

    Height

    70.9 mm
    2.79 inch
  • Travel

    Travel

    over extension 130%
Product features
Technical information
TITAN E TR-7120
Technical information

TITAN E TR-7120 

  • Full extension telescopic ball bearing drawer runner
  • Drawer carrier and pull in with fail-safe feature; actively pulls in the slide for the last few centimeters and holds the slide to prevent it from bouncing back as a result of the rebound-forces 
  • Supports loads up to 230 kg 
  • Part of our heavy duty slide range 
  • Perfect for applications such as office and kitcchen drawers but also various applications in the furniture, industry, professional storage and automotive segments 
length mm/inch
travel mm/ inch
cycles 10.000 kg/lbs
cycles 100.000 kg/lbs
art.nr.
fixation
400 mm / 15.7"
400 mm / 15.7"
170 kg / 374.8 lbs
103 kg / 227.1 lbs
101S43F
Cabinet side
450 mm /  17.7"
450 mm /  17.7"
190 kg / 418.9 lbs
116 kg / 225.7 lbs
101S44F
Metal: M5 / DIN 965 / ISO 7046
500 mm / 19.7"
500 mm / 19.7"
212 kg / 467.4 lbs
125 kg / 275.6 lbs
101S45F
M5 / DIN 7500
550 mm / 21.7"
550 mm / 21.7"
230 kg / 507.1 lbs
140 kg / 308.6 lbs
101S46F
Wood: 5,0 / DIN 7997
600 mm / 23.6"
600 mm / 23.6"
230 kg / 507.1 lbs
145 kg / 319.7 lbs
101S47F
700 mm / 27.6”
700 mm / 27.6”
228 kg / 502.7 lbs
145 kg / 319.7 lbs
101S48F
Drawer side
800 mm / 31.5”
800 mm / 31.5”
219 kg / 482.8 lbs
155 kg / 341.7 lbs
101S49F
Metal: M3 / DIN 7985 / ISO 7045
Wood: 3,0 / DIN 7997

Load capacity

Load capacity varies as a result of a number of factors. The main factors being the type of slide, length, and ratio between pull-out length and closed length. Another important factor is the number of cycles the slide is required to make. Thomas Regout distinguishes the type of usage between dynamic use and static use. Other factors that influence the load capacity are the features the slide is equipped with, and how it is mounted. Slides are usually mounted sideways so all data concerning load-capacity will be given for side mounted use. For information about the load capacity with bottom-mounted slides, please contact our sales department.

Dynamic load capacity
In order to determine the dynamic load capacity, all types of Thomas Regout slides have been tested for 100,000 cycles. Their maximum load capacity is compliant with, or exceeds, all common national and international standards including DIN, BIFMA, BS, EN, and JIS. The dynamic load capacity figures can be found in the graph below.

Static load capacity
Static load capacity is based on test results at 500, 1000 and 10,000 cycles. This is most common for industrial purposes. The static load capacity is considerably higher than the dynamic load capacity for all slides. The static load capacity figures listed below were determined for a single length of that slide and are for indication purposes only. Specific applications can be assessed by our R&D department and tested if necessary. 

Extension
The extension is defined as the ratio of the travel length of the slide (T) and the lenght of the slide in closed position (L): T = (T/L)*100%. The influence of the extension and length of the slide on the load capacity is shown in the graph below

Thermal resistance
Maximum temperature approx. 100°C, determined by applied plastics and lubrication.
Minimum temperature approx. -20°C, determined by applied plastics and lubrication.

Attention: maximum and minimum temperature are strongly determined by the specific application; duration of exposure, impact and other forces on slide and slide components etc. Values mentioned are indicative, it is important to judge each individual application.

Materials
Thomas Regout slides are available in numerous materials and coatings. Below is an overview of all the materials used in our slides. All our products are compliant with EU ROHS standards.

Sections:
- Cold rolled, low carbon and high yield strength steel according to EN 10268 and EN 10139
- Pre-galvanised low carbon and high yield strength steel according to EN 10147 and EN 10139
- Stainless steel according to EN 10088-2 and EN 10259
Ball cages: Electrolitically galvanised, cold rolled, low carbon and high yield strength steel according to EN 10131 and EN 10152
Ball bearings: Hardened carbon steel C15, Kl 4 DIN 5401
Locking features: PA, PE, PBTP, TPU, EPDM
Sequence devices: PA, TPU, PP Bumpers: RR PA, TPU, EPDM
Lubrication: Heavy duty ball bearing grease (free of lead), based on mineral oil

Stainless steel
More and more telescopic slides are used in new applications which requires very high corrosion resistance. Due to this fact, Thomas Regout has created the possibility to supply its total product range in stainless steel according to EN 10088-2 and EN 10259. Please inform us about your requirements to create the slide you need. Surface treatment: Our slides are available in a selection of standard finishes to the specifications listed below. If you require an alternative or specialized finish not listed, please contact us for further information

Surface treatment (finishing)
Our slides are available in a selection of standard finishes. These finishings can be found in the feature list. The overview provides information about which slide can have a specific surface treatment. If you require an alternative or specialized finish not listed, please contact us for further information.

Product images
TITAN E TR-7120
Product images
TITAN E TR-7120 | Full extension | Ball bearing slides | Thomas Regout International B.V.
TITAN E TR-7120 | Full extension | Ball bearing slides | Thomas Regout International B.V.
TITAN E TR-7120 | Full extension | Ball bearing slides | Thomas Regout International B.V.
TITAN E TR-7120 | Full extension | Ball bearing slides | Thomas Regout International B.V.
CAD Centre
TITAN E TR-7120
CAD Centre

TITAN E TR-7120 full extension telescopic ball bearing drawer runner for heavy duty applications with a drawer carrier L-shape and pull in with fail safe. 

Below you can download the stepfile, .PDF and other technical specifications which belong to the TITAN E TR-7120. Take a look at our Youtube channel to see the functionality of our pull in feature from our telescopic ball bearing drawer runners. 

EU

General downloads

CAD downloads

101S43
101S43 (3 Mb)
101S44
101S44 (3 Mb)
101S45
101S45 (3 Mb)
101S46
101S46 (3 Mb)
101S47
101S47 (3 Mb)
101S48
101S48 (3 Mb)
101S49
101S49 (1 Mb)

DWG downloads

101S43
101S43 (680 kb)
101S44
101S44 (685 kb)
101S45
101S45 (698 kb)
101S46
101S46 (710 kb)
101S47
101S47 (716 kb)
101S48
101S48 (768 kb)
101S49
101S49 (774 kb)

PDF downloads

101S43
101S43 (109 kb)
101S44
101S44 (116 kb)
101S45
101S45 (698 kb)
101S46
101S46 (122 kb)
101S47
101S47 (124 kb)
101S48
101S48 (134 kb)
101S49
101S49 (136 kb)

STEP downloads

101S43-in
101S43-in (2 Mb)
101S44-in
101S44-in (2 Mb)
102S45-in
102S45-in (2 Mb)
101S46-in
101S46-in (2 Mb)
101S47-in
101S47-in (2 Mb)
101S48-in
101S48-in (2 Mb)
101S49-in
101S49-in (2 Mb)

US

CAD downloads

101-s43_00_INCH
101-s44_00_INCH
101-s45_00_INCH
101-s46_00_INCH
101-s47_00_INCH
101-s48_00_INCH
101-s49_00_INCH
Share this page
News